- Out-of-Stock
Waxness Kit with Wax Heater WX-1C, 2 x Azulene...
- 1 x Cartridge Wax Heater WX-1C
- 2 x Azulene Soft Wax Cartridge 3.38 oz/100 g
- 1 x Epilating Strips 100 pcs
Reference: SKU008290
- 1 x Cartridge Wax Heater WX-1C
- 2 x Marine Blue Soft Wax Cartridge 3.38 oz/100 g
- 1 x Epilating Strips 100pcs
Wax Necessities WX-1C Wax Cartridge Heater:
Technical specifications:
Voltage: 110V
Frequency : 50Hz/60Hz
Power: 40W
Volume: 1pcs*100g
Max Temperature:100 degrees C
Fits standard cartridges with the following measurements:
Height: 13.5 cm / 5.31 inch
Length: 5.5 cm /2.16 inch
Width: 2.25 cm / 0.88 inch
Warranty 1 year
Ideal for use with all Wax Necessities soft wax cartridges, the WX-1C heater offers a simple and reliable service. On the exterior, the heater is molded in a highly resistant APS thermoplastic plastic resin. and aluminium is used for the quality of inner construction.
To prolong the warmer's life and efficiency, a Wax Necessities soft wax cartridge should always be inserted into the heating chamber. Never pour wax directly into the heating well.
To maintain the optimum condition of the heater, clean it regularly. Use Wax Necessities Citrus Cleaner for heavy wax residues. Do not use Citrus Cleaner directly on the `Wax Necessities`LOGO printed on the heater.
Your warmer has been tested before leaving the factory and is guaranteed against all manufacturing defects, under normal use, for 12 months from the date of purchase. If the heater fails to operate due to a defect in material or workmanship, we will repair or replace it with date proof of purchase. The guarantee does not apply to damaged lids or heaters resulting from misuse or accident.
INSTRUCTIONS FOR USE:
Remove the heater lid and place the wax cartridge directly into the heating chamber (We recommend Wax Necessities cartridges).
Plug in the appliance. Redlight indicates power is on.
The indicator light will remain illuminated during operation time. Please allow 10-30 min, depending on the ambient temperature, until the wax is ready to use.
To ensure the wax has reached a suitable temperature and to avoid loss of working time, it is recommended to plug in the heater approximately one-half hour before services begin.
Unplug and cover the unit loosely with the lid when not in use.
CAUTION: Locking the lid tightly may cause the lid to break. If the lid adheres to the melting pot,pre-heat the warmer before lid removal to prevent cracking.
Recommended Wax Necessities cartridges.
THE HEATER AND WAX ARE GETTING HOT. ALWAYS TEST WAX ON A SMALL AREA OF SKIN PRIOR TO APPLICATION.
Ideal for all Wax Necessities Cartridges 3.4 oz/100g.
IMPORTANT SAFETY INSTRUCTIONS:
Read all instructions before using the heater!
When using electrical appliances, basic safety precautions should be followed.
WARNINGS:
To reduce the risk of burns or Injury:
Always test the wax on a small area of the skin before application.
Do not touch the metallic surfaces of the warmer. The unit is hot when in use.
Use only on a solid, surface.
Do not plug in the unit where the power cord can be tripped on or where the cord hangs over the edge of the working table and can be pulled off.
Do not leave the unit on, unattended.
If the wax begins to smoke, unplug the unit immediately and have checked by an electrician.
Allow the unit to cool before cleaning or storing.
Do not leave children unattended around the working heater. Use the unit only for the intended use as described in this booklet.
For best results, also refer to Wax Necessities waxing instructions on the product package.
Do not use it in bathrooms or on wet floors and surfaces.
lf unit falls into the water, unplug it immediately. Do NOT reach into the water.
Never operate the heater if it has a damaged power cord or plug if it is not working properly. or has been dropped or damaged.
Do not connect more than 3 heaters on an extension cord.
For professional use only!
2 x Marine Blue Soft Wax Cartridge 3.38 oz/100 g:
Matte texture. No odorants are contained for most natural depilation.
Marine Blue wax is a combination of synthetic and natural resins and innovative components, giving wax special properties.
This type of wax is known for outstanding elasticity. It`s applied to large areas in a very thin and even layer with the help a cartridge.
Melting temperature is 37-39 degrees C/99-102 degrees F. While stiffening, the wax forms a thin film that fixes all the hairs and ensures rigid adherence with the depilation strip.
Leaves no stickiness on the skin. 100% hair removal on the first try, no breaking hair.
See detailed instructions on the package.
- Combines the advantages of natural and synthetic waxes
- Leaves no stickiness. No additional lotion treatment after depilation is needed.
- Ideal for all hair types
- Impeccable salon results even after 1st use
- Very cost-effective
- Use with strips
- No artificial scent
Application:
1. Insert the cartridge into the heater and warm up (118F).
2. Apply the wax to the skin in the direction of hair growth.
3. Press the depilation strip on the treated area wax.
4. Remove the strip with a sharp pull against the direction of the hair growth.
5. Use after wax lotion (optional).
CAUTION:
- Please read the instructions in full before proceeding with the treatment. Failure to follow instructions and warnings may result in severe skin irritation and other injuries.
- Before using, test a small area to be waxed and wait 24 hours. If no irritation occurs, you may proceed to use it.
- Do not apply wax on mucous tissues, blemishes, moles, warts, varicose veins, sunburns, or any inflamed areas.
- Do not wax if you use creams with tretinoin, chemical peels, or have had plastic surgery, without a doctor's release.
- Do not use it if you suffer from any medical condition that may affect or compromise the skin.
- Consult a doctor before using if you suffer from any skin-related disorders, circulatory problems, or diabetes.
- Do not use on nipples, perianal, vaginal, or genital areas. Do not use it to remove hair inside the nostrils, ears, eyelids, or eyelashes.
- Do not use on areas that have been shaved, waxed, tweezed, or treated with hair removal creams within 24 hours.
- Avoid HOT baths, tanning beds, direct sun exposure, swimming, saunas, or other activities that may cause skin irritation.
Ingredients: Ingredients: Peg-3 Dirosinate, Glyceryl Rosinate, Beeswax, C.I.77891, Titanium Dioxide, Talc, C.I.61565.
Non-Woven Epilating strips:
These strips will help to achieve flawless removal of wax on large body areas.
Package of high-quality 100 epilating strips.
3 inch x 8.75 inch
Perfect for the body and legs.
IMPORTANT NOTE: Professional Use Only! Please read carefully all the instructions on the product label before use.
Data sheet